朱晓锋,主要从事电动(新能源)汽车和机器人伺服控制系统领域的研究。主持国家自然科学基金(青年)项目一项,江苏省高校面上项目和企业横向项目各一项。参与一些重大项目,包括国家重点研发计划课题、国家“973计划”、国家杰出青年科学基金、国家自然科学基金和一些企业的横向课题等;以第一作者或学生第一作者发表论文16篇,包括11篇SCI论文(其中JCR一区5篇,二区4篇,三区2篇)和5篇EI论文。江苏省双创博士、江苏省科技副总,东南大学优秀博士毕业论文,多次获得奖学金(包括一次博士生国家学业奖学金一等;一次南瑞继保奖学金和一次博士研究生国家奖学金)。目前担任IEEE Transactions on Industrial Electronics/Magnetics/Energy Conversion,IET Electric Power Applications等知名国际期刊的审稿人。
学习经历
2015.09~2020.06,东南大学,电气工程专业,博士
2019.09~2020.09,帕多瓦大学,联合培养博士研究生
工作经历
2020.08~至今,讲师、副教授,南京师范大学
(1)科研项目:
国家自然科学基金(青年):电动汽车用非晶合金磁通切换永磁电机研究,(2022.01~至今),主持
江苏省高校面上项目:电动汽车用磁通切换电机优化设计研究,(2021.09~至今),主持
江苏省双创博士项目:(2022.01~至今),主持
横向课题:
高速永磁电机开发,(2021.07-2022.06),主持
伺服系统用永磁同步电机电磁方案开发,(2025.06-至今),主持
起重机用电机电磁方案设计,(2025.08-至今),主持
(2)科研成果
X.Zhu and W.Hua,Back-EMF waveform optimization of flux-reversal permanent magnet machines,AIP Advance,Vol.7,no.5,056613,May,2017.
X.Zhu and W.Hua,An improved configuration for cogging torque reduction in flux-reversal permanent magnet machines,IEEE Transactios on Magnetics,Vol.53,no.6,8102504,Jun.2017.
X.Zhu,W.Hua and Z.Wu,Cogging torque suppression in flux-reversal permanent magnet machines,IET Electric Power Applications,Vol.12,no.1,pp.135-143,Jan.2018.
X.Zhu,W.Hua,Z.Wu,W.Huang,H.Zhang and M.Cheng,Analytical approach for cogging torque reduction in flux-switching permanent magnet machines based on magnetomotive force-permeance model,IEEE Transactions on Industrial Electronics,Vol.65,no.3,pp.1965-1979,Mar.2018.
X.Zhu,W.Hua and Z.Wu,Cogging torque minimisation in FSPM machines by right-angle-based tooth chamfering technique,IET Electric Power Applications,Vol.12,no.5,pp.627-634,May,2018.
W.Hua,X.Zhu and Z.Wu,Influence of coil pitch and stator-slot/rotor-pole combination on back EMF harmonics in flux-reversal permanent magnet machines,IEEE Transactions on Energy Conversion,Vol.33,no.3,pp.1330-1341,Sep.2018.
X.Zhu,W.Hua,W.Wang and W.Huang,Analysis of back-EMF in flux-reversal permanent magnet machines by air gap field modulation theory,IEEE Transactions on Industrial Electronics,Vol.66,no.5,pp.3344-3355,May,2019.
X.Zhu and W.Hua,Stator-slot/rotor-pole pair combinations of flux-reversal permanent magnet machine,IEEE Transactions on Industrial Electronics,Vol.66,no.9,pp.6799-6810,Sep.2019.
X.Zhu,W.Hua and G.Zhang,Analysis and reduction of cogging torque for flux-switching permanent magnet machines,IEEE Transactions on Industry Applications,Vol.55,no.6,pp.5854-5864,Nov.-Dec.2019.
X.Zhu,W.Hua,B.Wang and N.Dai,Comparison of stator- and rotor-surface-mounted PM brushless machines,IET Electric Power Applications,Vol.14,no.1,pp.62-70,Jan.2020.
L.Shao,W.Hua,Z.Zhu,X.Zhu,M.Cheng and Z.Wu,A novel flux-switching permanent magnet machine with overlapping windings,IEEE Transactions on Energy Conversion,Vol.32,no.1,pp.172-183,Mar.2017.
G.Zhao,W.Hua,X.Zhu and G.Zhang,The influence of dummy slots on stator surface-mounted permanent magnet machines,IEEE Transactios on Magnetics,Vol.53,no.6,7207105,Jun.2017.(SCI)
L.Zhou,W.Hua,Z.Wu,X.Zhu and B.Zhang,Analysis of coupling between two sub-machines in co-axis dual-mechanical-port flux-switching PM machine for fuel-based extended range electric vehicles,IET Electric Power Applications,Vol.13,no.1,pp.48-56,Jan.2019.(SCI).
M.Cheng,H.Wen,P.Han andX.Zhu,Analysis of airgap field modulation principle of simple salient poles,IEEE Transactions on Industrial Electronics,Vol.66,no.4,pp.2628-2638,Apr.2019.(SCI)
Z.Wu,Z.Zhu,W.Hua,S.Akehurst,X.Zhu,W.Zhang,J.Hu,H.Li and J.Zhu,Analysis and suppression of induced voltage pulsation in DC winding of five-phase wound-field switched flux machines,IEEE Transactions on Energy Conversion,Vol.34,no.4,pp.1890-1905,Dec.2019.(SCI)
朱晓锋,花为.定子永磁型磁通切换电机齿槽转矩及其抑制技术,中国电机工程学报,2017,37(21):6146-6157.(EI)
花为,朱晓锋.磁通反向永磁电机及其关键技术综述,中国电机工程学报,已录用待发表.(EI)
X.Zhu and W.Hua,Back-EMF waveform optimization of flux-switching permanent magnet machines,inProc.22nd IEEE International Conference on Electrical Machines (ICEM),2016.
X.Zhu,W.Hua and M.Cheng,Cogging torque minimization in flux-switching permanent magnet machines by tooth chamfering,inProc.Energy Conversion Congress and Exposition(ECCE),2016.
X.Zhu and W.Hua,Cogging torque suppression in flux-switching permanent magnet machines by superposition of single rotor tooth,inProc.Energy Conversion Congress and Exposition(ECCE),2019.
X.Zhu, W.Hua and G. Zhao,Analysis of Open-Circuit Performances in Flux-Reversal Permanent Magnet Machines by Superposition Method,IEEE TRANSACTIONS ONENERGYCONVERSION,Vol.36,no.4,3073-3083,Dec.,2021.
X. Zhu and W. Huang,Investigation of Five-Phase Flux-Switching Permanent Magnet Machines for EV and HEV Applications,IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS, Vol. 60,no.1,1071-1082,Jan.,2024.
X. Zhu and Y. Yue, Study on Winding Inductances in Stator Surface-Mounted Permanent Magnet Machines, ENERGIES, vol. 5359, no. 17, 1-13, Oct. 2024.